BVYWS - PRO GRADE PLASTIC RF CMT
- MSDS: BVYWS
- Manufacturer: MONSEY PRODUCTS CO
- Product Name: PRO GRADE PLASTIC RF CMT
- National Stock Number: 5610-00N054893
Product Identification
Product ID:PRO GRADE PLASTIC RF CMT
MSDS Date:12/20/1989
FSC:5610
NIIN:00N054893
MSDS Number: BVYWS
Responsible Party
KIMBERTON, PA 19442
US
Emergency Phone: 215-933-8888
Info Phone: 215-933-8888
Cage: 6W507
Contractor
Telephone: 610-933-8888
Cage: 6W507
Ingredients
STODDARD SOLVENT
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 30-60%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
ASBESTOS (SARA III)
CAS: 1332-21-4
RTECS: CI6425000
Fraction By Weight: <15%
OSHA PEL SEE 1910.1001
ACGIH TLV: 0.2 - 2 FIBER/CC; 94
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE:OVEREXPOSURE TO VAPORS CAUSES
EYE IRRITATION, BLURRED VISION, DIZZINESS, HEADACHES EVEN
UNCONSCIOUSNESS. PROLONGED OR REPEATED SKIN CONTACT CAN CAUSE
MODERATE IRRITATION, DEFATTING, DERMATITIS. SWALLOWING CAN CAUSE
GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING, AND DIARRHEA.
ASPIRATION OF (EFFECTS OF OVEREXP)
Explanation of Carcinogenicity:ASBESTOS:IARC GROUP 1, SUPP 7, P 106,
1987; KNOW TO BE CARCIN, NTP 7TH ANN RPT, 1994, OSHA REGULATED, 29
CFR 1910.1001.
Effects of Overexposure:HLTH HAZ:MATERIAL INTO LUNGS CAN CAUSE CHEMICAL
PNEUMONITIS WHICH CAN BE FATAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE FROM VAPOR IMMED. IF OVERCOME, CALL PHYS. IF
BRTHG STOPPED OR IRREGULAR, START RESUSCITATION OR ADMINISTER
OXYGEN, AS NEEDED. EYES:FLUSH W/LG AMTS OF WATER FOR @ LEAST 15
MINS, LIFTING UP PER & LOWER LIDS OCCASNLY. GET MED ATTN.
SKIN:REMOVE CONTAMD CLOTHES & WASH W/WATERLESS HANDCLEANER OR SOAP
& WATER. INGEST:DO NOT INDUCE VOMITING.
Fire Fighting
Flash Point Method:SCC
Flash Point:105F,41C
Lower Limits:0.9%
Upper Limits:4.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG, SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT MIX/STORE W/STRONG OXIDANTS LIKE
LIQ CHLORINE/OXYG. KEEP CNTNRS TIGHTLY CLSD. CLSD CNTNRS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT. APPLIC TO (SUPDAT)
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION. KEEP PEOPLE AWAY.
RECOVER FREE LIQUID. ADD ABSORB (SAND, EARTH, SAWDUST, ETC.) TO
SPILL AREA. AVOID BRTHG VAPORS. VENTILATE CONFINED SPACES. OPEN ALL
WINDOWS & DOORS. KEEP PROD OUT OF SEWERS & WATERCOURSES BY
(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CNTNRS CLSD WHEN NOT IN USE. DO
NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME OR STRONG OXIDANTS.
ADEQUATE VENT REQD.
Other Precautions:AVOID BRTHG VAP. AVOID PRLNGD/RPTD CONT W/SKIN.
REMOVE CONTAMD CLTHG & LAUNDER BEFORE REUSE. REMOVE CONTAMD SHOES &
THORO DRY BEFORE REUSE. WASH SKIN THORO W/SOAP & WATER AFTER CONT.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA HYDROCARBON VAPOR CANISTER OR
NIOSH/MSHA SUPPLIED-AIR RESP PROT IN CONFINED/ENCLOSED SPACES IF
NEEDED.
Ventilation:LOC EXHAUST:FACE VELOCITY 40FPM. USE ONLY WITH ADEQUATE
VENTILATION.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:SPLASH GOGG OR FACE SHIELD.
Other Protective Equipment:CHEMICAL RESISTANT APRON OR OTHER CLOTHING
TO AVOID REPEATED OR PROLONGED SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:HOT SURF REQS SPECIAL PRECAUT. DURING EMER CNDTNS, OVEREXPOS
TO DECOMP PROD MAY CAUSE HLTH HAZ. SYMP MAY NOT BE IMMED APPARENT.
OBTAIN MED ATTN. SPILL RELEASE:DIKING/IMPOUNDING, ALSO ADVISE
AUTHORITIES.
Chemical Properties
HCC:F5
Boiling Pt:B.P. Text:>310F,>154C
Vapor Pres:2 @68F
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER (BUTYL ACETATE =1)
Solubility in Water:NONE
Appearance and Odor:BLACK FLUID ODOR CHARACTERISTIC OF PETROLEUM
SOLVENT
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES, SMOKE AND CO2, CARBON MONOXIDE
IF COMBUSTION IS COMPLETE.
Disposal
Waste Disposal Methods:ASSURE CONFORMITY W/APPLIC DISPOSAL REGULATIONS.
DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.